Sound Hole Pickup for Acoustic Steel String Guitars with Volume & Tone. Made in Taiwan.
The Belcat EGT-202 features two transducers that can be easily mounted to the Guitar or any acoustic instrument to provide optimal tone. Can be used on steel string & nylon string guitars.
The Cherub GT-4 is a 4 band EQ with Chromatic tuner, feedback-fighting notch and phase effect. The visible portion of GT-4 is only 52mm x 54mm x 4mm. Low battery message will be displayed when the battery is getting low. FEATURES: 3 band EQ Chromatic Tuner Feedback-fighting Notch Filter Phase Mid Frequency Control Low Battery Check LED Includes Piezo Ceramic Pick-up SPECIFICATIONS: Input impedance: 10MΩ Frequency Response: 20Hz - 20kHz Control Range: Low ±12dB at 100Hz / Middle ±12dB at 250Hz-10kHz / High ±12dB at 6kHz Pick-up: Piezo Ceramic Pick-up Output jack: 6.35mm Battery Life: Over 100 hours Power Supply: 9V Alkaline Battery Dimensions (L x W): 54mm x 52mm
The Cherub GT-6 is an acoustic guitar preamp featuring a 4 Band EQ with built-in highly accurate chromatic tuner. It has phase, reverb, delay, chrous and wide effects. The compact size makes it easy to install into a guitar and the visible portion is only 52mm x 54mm x 4mm. Low battery message is displayed when the battery is getting low. FEATURES: 3 band EQ + Mid Frequency Control Chromatic Tuner Phase, Reverb, Delay, Chorus & Wide FX Low Battery Check LED Includes Piezo Cable Pick-up SPECIFICATIONS: Input impedance: 10MΩ Frequency Response: 20Hz - 20kHz Control Range: Low ±12dB at 100Hz / Middle ±12dB at 1.5kHz / High ±12dB at 3kHz Pick-up: Piezo Cable Pick-up Output jack: 6.35mm Battery Life: Over 15 hours Power Supply: 9V Alkaline Battery Dimensions (L x W): 54mm x 52mm
This value-priced cousin of the award-winning Rare Earth pickup shares the same neodymium magnet structure for exceptional string balance and sparkling acoustic clarity. The Neo-D’s low-profile, high-impedance design needs no battery. Neo-D Soundhole Pickup Features: Neodymium magnet structure for exceptional string balance and sparkling acoustic clarity Low profile, high-impedance design needs no battery Easy installation with no alteration, plug and play right out of the box Excellent string-to-string balance and acoustic clarity Humbucker model features stacked coils to eliminate noise Fits in soundholes as small as 3-7/8″ (98.5 mm) diameter
This value-priced cousin of the award-winning Rare Earth pickup shares the same neodymium magnet structure for exceptional string balance and sparkling acoustic clarity. The Neo-D’s low-profile, high-impedance design needs no battery. Neo-D Soundhole Pickup Features: Neodymium magnet structure for exceptional string balance and sparkling acoustic clarity Low profile, high-impedance design needs no battery Easy installation with no alteration, plug and play right out of the box Excellent string-to-string balance and acoustic clarity Fits in soundholes as small as 3-7/8″ (98.5 mm) diameter
Quick Clamp Microphone Style Pickup for Acoustic Guitar and other instruments. Made in Taiwan.
The Headway EDB-2 boasts Refined Class “A” Inputs and Pro Audio IC Components, easy to read Pro-Audio design layout & sturdy metal housings built to withstand “Life on the Road”. The EDB-2 is supplied with belt clips, rubber feet and is threaded for microphone stands. “The Swiss Army Knife for the gigging musician.” Comprehensively packed with practical and effective sound crafting features: Twin channel with individual inputs & gain controls 5 Band EQ assignable to Channel 1, 2 or both Notch Filter assignable to Channel 1 or 2 Huge 0-32 dB Gain to interface with most mixers/desks etc Phantom Power is assignable to either "ring", "tip", or XLR to power virtually all instrument microphones/pickups. Phase Reverse assignable t each channel Earth Lift Switch "Range" Switch tuned for specific instruments i.e. Violin, Guitar, Bass etc iPod Input for backing tracks, practice routines etc Mute Switch Mono, Stereo & XLR Inputs, Jack and XLR Outputs Battery or Mains powered (power supply included)
Serious equipment for serious musicians made simple. A gigging musician playing any acoustic instrument will know the difficulties in reproducing the sonic qualities at a cafe or pub gig, that sounded so great at home. The EDM-1 Acoustic Pre-Amp solves these problems by taking the signal from the intruments’ pickup and giving you complete control over the bass, mid and treble, helping to add a richness while acheiving a beautifully clean sound. Control like never before. The Range control is a Hi-Pass filter that has settings for several different instruments including; Rock Acoustic (300Hz), Ukulele, Violin/Mandolin, Viola, Tenor G, Bouzouki, Guitar (80Hz), Low D Guitar, Cello, Baritone and Bass. Able to be mounted on a belt clip or screwed onto a mic stand, the EDM-1 is built into a sturdy metal casing which comes with a set of batteries and rubber feet. The EDM-1 is an essential piece of kit for acoustic players - solo, duet or in a small band - who need to keep a handle over their sound and deliever an authentic acoustic tone to the masses. The EDM-1 Specs: • 3 Band EQ • Tuneable “Range” Control covers all instruments • 9v Phantom Power assignable to “Ring” or “Tip” • XLR Adaptor included - Converts Output Jack to XLR Balanced DI Out • 3 Way Impedance Selector • Earth Lift Switch • Mute Switch • Battery, Mains (adapter optional) or Phantom Powered
Copyright © 2024 BC Wholesalers
