The Leem SPA-10 is a sturdy yet lightweight ABS molded powerful 2-way active speaker system that is of a convenient size for moving, transporting and installing. It is well featured with a built-in MP3 player with SD card slot and USB input SPECIFICATIONS: Freq.Response: 70Hz 20kHz (±3dB) Sensitivity (1M/1W): 93dB Woofer: 10" MF/LF 1.5" voice coil Driver: 1" exit-1.0" compression driver Crossover: 3.0kHz Max SPL: 115dB Input Connector: XLR / JACK / RCA Rated Power (@4ohm): 65W Max. Power (@4ohm): 120W Dimension (W x H x D): 365 x 565 x 300mm Weight: 7.8Kg
The Leem SPA-12 is a sturdy yet lightweight ABS molded powerful 2-way active speaker system that is of a convenient size for moving, transporting and installing. It is well featured with a built-in MP3 player with Bluetooth, SD card slot and USB input. SPECIFICATIONS: Type: 2-Way Active PA Speaker Freq.Response: 60Hz 20kHz (±3dB) Sensitivity (1M/1W): 94dB Woofer: 12" MF/LF 2.0" voice coil Driver: 1" exit-1.0" compression driver Crossover: 2.8kHz Max SPL: 120dB Bluetooth Module: 4.2 Input Connector: XLR / JACK / RCA Rated Power (@4ohm): 100W Max. Power (@4ohm): 200W Dimension (W x H x D): 435 x 670 x 400mm Weight: 11Kg
The Leem SPA-15 is a sturdy yet lightweight ABS molded powerful 2-way active speaker system that is of a convenient size for moving, transporting and installing. It is well featured with a built-in MP3 player with Bluetooth, SD card slot and USB input. SPECIFICATIONS: Type: 2-Way Active PA Speaker Freq.Response: 50Hz 20kHz (±3dB) Sensitivity (1M/1W): 95dB Woofer: 15" MF/LF 2.0" voice coil Driver: 1" exit-1.0" compression driver Crossover: 2.5kHz Max SPL: 120dB Bluetooth Module: 4.2 Input Connector: XLR / JACK / RCA Rated Power (@4ohm): 100W Max. Power (@4ohm): 200W Dimension (W x H x D): 485 x 755 x 400mm Weight: 14.2Kg
The Leem SPA-8 is a sturdy yet lightweight ABS molded powerful 2-way active speaker system that is of a convenient size for moving, transporting and installing. It is well featured with a built-in MP3 player with SD card slot and USB input. SPECIFICATIONS: Type: 2-Way Active PA Speaker Freq.Response: 75Hz 20kHz (±3dB) Sensitivity (1M/1W): 92dB Woofer: 8" MF/LF 1.5" voice coil Driver: 1" exit-1.0" compression driver Crossover: 3.5kHz Max SPL: 110dB Input Connector: XLR / JACK / RCA Rated Power (@8ohm): 100W Dimension (W x H x D): 305 x 455 x 255mm Weight: 6.3Kg
Approach your next event with something big, bold and Bluetooth-compatible—Thump GO. It’s a portable battery-powered Bluetooth loudspeaker that delivers full, dynamic sound for any application. TAKE YOUR STAGE ANYWHERE Set the stage, wherever you want it to be. Bring professional live sound reinforcement to small concerts, corporate events, assemblies, weddings, parties and more. Mackie Thump GO puts powerful sound processing and wireless control in your hands, whether you’re holding a guitar, wired or wireless microphone or DJ controller. Built-in 2-Channel Mixer Connect any combination of audio sources, including guitar, microphone, keyboard, or DJ mixer. Thump GO’s built-in 2-channel mixer has two combo input jacks for easy plug-and-play. Paired with the Thump Connect 2 app, you can dial in your sound and let creativity do the rest. No Power, No Problem The removable lithium-ion battery pack is key to Thump GO’s ultra-portable design. With a single charge, Thump GO can deliver signature “thump” and clarity for 12 hours. Pair a second rechargeable battery for extra long gigs. Sound Great Instantly Thump GO has some pretty powerful audio processing under the hood that you can use to step up your game. Choose from four different application-specific voicing modes to optimize your sound with the push of a button. Duck Duck Shush DJs will especially love this one. Thump GO has an integrated Music Ducking Mode that attenuates the volume level of channel 2 whenever a signal is received on channel 1. Now you can make big announcements like, “Hear how great I sound” without messing with your gain levels on the mixer or your equipment. Squeal-Be-Gone If we really wanted to get rid of feedback, we’d have to rewrite the laws of acoustics, which sounds like an uphill battle, to say the least. Instead, we gave Thump GO a Feedback Eliminator to get rid of that unwanted squeal. Just hit the button and say goodbye to awkward speeches (at least the ear piercing part). Wireless Streaming and Control No DJ equipment? No problem! Easily stream music directly to your Thump GO via Bluetooth. Using the Thump Connect 2 app, you can adjust anything from EQ and Voicing Modes to channel levels and custom presets—all from the center of the dancefloor. Features: Ultra-efficient 200W Class-D amplifier 8” custom high-output woofer and 1” compression driver for clean, punchy sound Removable lithium-ion battery with up to 12 hours of battery life Bluetooth® connectivity for music streaming or linking a second Thump GO Wireless control via the Thump Connect 2 app 2-channel digital mixer with dual XLR / TRS combo inputs and XLR mix output Feedback eliminator to prevent unwanted squeals and rumble 4 application-specific speaker modes—Music, Speech, Monitor and Sub Indoor or outdoor voicing modes Music Ducking Mode automatically lowers channel 2 when channel 1 receives signal Sturdy, lightweight speaker enclosure to withstand heavy use Rugged, powder-coated steel grille
The DM 115 Sub features an ultra-reliable power section that provides a total of 800 watts of peak available power with DDT™ compression. This powered enclosure also feature a 15" heavy-duty woofer with a 3" voice coil. The DM 115 Sub provides a balanced input via a combination jack that accepts balanced TRS 1/4" input as well as a balanced XLR input. There are two balanced thru high pass XLR outputs, and a full-range XLR output. There is an adjustable Level control, as well as a combination LED indicator, that illuminates when power is on and when the "soft-limiting" DDT circuit is activated. Features: Vented bass powered subwoofer enclosures 15" premium heavy-duty woofer Power amp has forced air cooling for maximum reliability Internal line level low-pass/high-pass crossover network Fully adjustable Kosmos® C for increased bass impact Polarity switch for polarity reversal of subwoofer Full-coverage heavy-duty perforated steel grill Steel handles XLR/1/4" combo jack input Compact dimensions for a 15" woofer based sub Two high-pass XLR outputs, and one full-range thru XLR output Threaded pole mount with speaker pole included 800 watts peak available power Ground lift switch for lifting cable shield from ground Weight Packed: 90.98 lb (41.27 kg) Width Packed: 27.25" (69.22 cm) Height Packed: 28" (71.12 cm) Depth Packed: 21.5" (54.61 cm)
The DM 118 Sub features an ultra-reliable power section that provides a total of 800 watts of peak available power with DDT™ compression. This powered enclosure also features an 18" heavy-duty woofer with a 3" voice coil. The DM 118 Sub provides a balanced input via a combination jack that accepts balanced TRS 1/4" input as well as a balanced XLR input. There are two balanced thru high pass XLR outputs, and a full-range XLR output. There is an adjustable Level control, as well as a combination LED indicator, that illuminates when power is on and when the "soft-limiting" DDT circuit is activated. Features: Vented bass powered subwoofer enclosures Power amp has forced air cooling for maximum reliability Internal line level low-pass/high-pass crossover network XLR/1/4" combo jack input Two high-pass XLR outputs, and one full-range thru XLR output Ground lift switch for lifting cable shield from ground Full-coverage heavy-duty perforated steel grill Fully adjustable Kosmos® C for increased bass impact Steel handles Compact dimensions for an 18" woofer based sub 18" premium heavy-duty woofe Threaded pole mount with speaker pole included 800 watts peak available power Large heavy-duty locking caster with damped bearings Polarity switch for polarity reversal of subwoofer Weight Packed: 113.98 lb (51.7 kg) Width Packed: 27.5" (69.85 cm) Height Packed: 31" (78.74 cm) Depth Packed: 24.75" (62.87 cm)
The PVXp™ 12 DSP features a reliable bi-amped power section that provides a total of 830 Watts of peak available dynamic power. With that much available power, speaker protection is critical. Advanced digital signal compression prevents audible overload, protecting the speakers from harmful distortion at high output levels. This powered enclosure also includes heavy duty speaker drivers; it features a 12" woofer with a 2-3/8" voice coil and a 50 oz. magnet. This is coupled with the RX14 compression driver that includes a 1.4" titanium diaphragm on a 100-degree horizontal x 50 degree vertical pattern asymmetrical horn. The PVXp™ 12 DSP provides a balanced input via a combination jack that accepts a balanced TRS 1/4" input, as well as a balanced XLR input and summed RCA jacks. There are two balanced Thru outputs, a male XLR and a 1/4" TRS. The LCD display and EQ presets, along with other operating parameters are accessed via a one-knob selector. Features: Two-way bi-amplified analog amp powered speaker system DSP I/O is at 48 kHz and 24 bits, with low-jitter, professional grade components Fan cooled for maximum reliability Peavey Exclusive Quadratic Throat Waveguide™ technology, 100 by 50 degree coverage DSP processing is 64 bit double-precision Input is via a combo female XLR and 1/4" TRS phone jack with balanced input A Mic/Line switch provides for two different gain settings Thru output is via a male XLR jack and 1/4" TRS phone jack Multiple Factory Preset EQ settings Rugged plastic injection-molded trapezoidal enclosure 630 watts peak dynamic woofer power, 200 watts peak dynamic tweeter power Full-coverage perforated steel grille, with powder coat finish RX™ 14 compression driver, with 1.4 inch titanium diaphragm Pole mount molded-in for 1 3/8" diameter poles 12" heavy-duty woofer with a 2-3/8" voice coil & 50 oz. magnet Top, bottom and right side flying point inserts Asymmetrical horn aims the sound down 10 degrees, at the audience, not over their heads Weight Unpacked: 42.00 lb (19.05 kg) Weight Packed: 48.00 lb (21.77 kg) Width Packed: 20" (50.8 cm) Height Packed: 26.75" (67.95 cm) Depth Packed: 18.25" (46.36 cm)
Peavey Electronics® set the standard for affordable, feature-packed powered P.A. solutions more than four decades ago. The new Peavey PVX™ Series of active and passive loudspeakers are the culmination of decades of R&D and experience building the best portable, all-in-one audio solutions, bringing legendary Peavey performance and reliability to audio pros and musicians of all levels. Continuing the PVX™ Series, the PVXp Sub from Peavey features an ultra-reliable power section that provides a total of 800 watts of peak available power with DDT™ compression. This powered enclosure also features a 15" heavy-duty woofer with a 3" voice coil. The PVXp Sub provides a balanced input via a combination jack that accepts balanced TRS 1/4" input as well as a balanced XLR input. There are two balanced thru high pass XLR outputs, and a Full-Range XLR output. There is an adjustable Level control, as well as a combination LED indicator, that illuminates when power is on and when the "soft-limiting" DDT circuit is activated. Peavey PVXp Sub is housed in a durable enclosure that includes a pole mount for additional PVX speakers, a black powder-coated steel grille provides driver protection and a clean, professional appearance. Features: 15" heavy-duty woofer Internal line level low-pass/high-pass crossover network Fully adjustable KOSMOS® C for increased bass impact XLR/one quarter inch combo jack input Power amp has forced air cooling for maximum reliability Large heavy-duty locking casters Perforated steel grill Steel handles T-nut woofer mounting Rugged dado and rabbet construction plus internal braces for lightweight yet strong cabinet 800 watts peak available power Compact dimensions for a 15" woofer based sub Threaded pole for top speaker mount Two high-pass XLR outputs, one full range thru XLR output Weight Packed: 88.98 lb (40.36 kg) Width Packed: 29" (73.66 cm) Height Packed: 30" (76.2 cm) Depth Packed: 21" (53.34 cm)
Copyright © 2024 BC Wholesalers