LiveZilla Chat
BC Wholesalers Live Chat Software
Categories
Manufacturers
Currencies
Amps Acoustic

Amps Acoustic

/
Displaying 1 to 9 (of 10 products)
  • Cort AF30 Acoustic Guitar Amplifier

    Cort AF30 Acoustic Guitar Amplifier

    The Cort AF30 Acoustic Guitar Amplifier provides 30 watts of clean solid state power as well as onboard DSP for lush chorus, delay and chorus-delay effects. The AF Series amps also feature a 4-band graphic EQ for further tone-shaping as well as a notch filter to eliminate feedback – a feature normally found in amps that cost much more. Ideal for small venues, rehearsals and practice applications, the mobile but powerful AF30 will extend the range of your acoustic-electric guitar with performance, features, value and musicality. 30W POWER OUTPUT The 30w output power is more than enough for practice applications and ideal for small venue performances such as church settings and small clubs. 1 x 8” WOOFER + 1 x TWEETER The AF30’s combination of the single 8” woofer with a single tweeter provides a balanced sound for firm punchy lows with clear and defined highs. 4-BAND GRAPHIC EQUALIZER The 4-band equalizer features carefully selected frequency bands (70, 400, 800, 10K) that are ideal to bring the natural character of your acoustic guitar while providing a wide range of sounds and tonal character. ONBOARD DSP (FX) The onboard Digital Signal Processor chip provides chorus, delay and chorus + delay effects to add spatial dimension to your acoustic-electric sounds. The type of effect and the level of each effect can easily be controlled with the rotary knobs. The effect can also be switched on and off with the push switch. NOTCH CONTROL Feedback can be a problem with acoustic instruments. With the notch control, you can eliminate the unwanted feedback by engaging the notch switch and using the knob to select the frequency causing the feedback. MIC / AUX-IN / PHONES / PREAMP-OUT The AF30 provides superb flexibility and versatility with in-out jacks to extend the range of the amplifier and your instrument. With pro-level XLR input, auxiliary in for CD players or MP3 players, headphone out and preamp out to connect to mixing consoles and PA systems, the AF30 can cover virtually any application – from practice sessions to large venue concerts. TILT-BACK DESIGN The AF30’s tilt-back cabinet design has two angles for the most optimum sound projection depending on the playing situation. The straight angle is typically used for projecting to an audience while tilt-back is for monitoring the performer’s sound. Features: Cort AF30 Acoustic Guitar Amplifier 30 Watt RMS 1 x 8" Woofer 1 x Tweeter 4 Band Graphic Equalizer Onboard DSP Effects: Chorus, Delay and Chorus + Delay effects Notch Control 1/4" Instrument Input XLR Microphone/Aux In Headphone Out Preamp Out Tilt Back Design White Tolex Covering 392 x 320 x 305mm Dimensions 8 Kg

  • Cort AF60 Acoustic Guitar Amplifier

    Cort AF60 Acoustic Guitar Amplifier

    The Cort AF60 Acoustic Guitar Amplifier provides 60 watts of clean solid state power with onboard DSP for lush chorus, delay and chorus-delay effects/ It also features a 4-band EQ for further tone shaping as well as a notch filter to eliminate feedback, a feature normally found in amps that cost much more. 60W POWER OUTPUT The 60w of the AF60 will be able to handle medium size venues with plenty of power and headroom. 2 x 8” WOOFER + 1 x TWEETER The AF60’s combination of two 8” woofers with a single tweeter provides a balanced sound for firm punchy lows with clear and defined highs. 4-BAND GRAPHIC EQUALIZER The 4-band equalizer features carefully selected frequency bands (70, 400, 800, 10K) that are ideal to bring the natural character of your acoustic guitar while providing a wide range of sounds and tonal character. ONBOARD DSP (FX) The onboard Digital Signal Processor chip provides chorus, delay and chorus + delay effects to add spatial dimension to your acoustic-electric sounds. The type of effect and the level of each effect can easily be controlled with the rotary knobs. The effect can also be switched on and off with the push switch. NOTCH CONTROL Feedback can be a problem with acoustic instruments. With the notch control, you can eliminate the unwanted feedback by engaging the notch switch and using the knob to select the frequency causing the feedback. MIC / AUX-IN / PHONES / PREAMP-OUT The AF60 provides superb flexibility and versatility with in-out jacks to extend the range of the amplifier and your instrument. With pro-level XLR input, auxiliary in for CD players or MP3 players, headphone out and preamp out to connect to mixing consoles and PA systems, the AF60 can cover virtually any application – from practice sessions to large venue concerts. TILT-BACK DESIGN The AF30’s tilt-back cabinet design has two angles for the most optimum sound projection depending on the playing situation. The straight angle is typically used for projecting to an audience while tilt-back is for monitoring the performer’s sound. Specifications: Cort 60w Acoustic Amplifier 2 x 30W RMS 2 x 8" Woofer and 1 x Tweeter 4 Band EQ Onboard DSP Effects: Chorus, Delay and Chorus-Delay Notch Control 1/4" Input XLR Mic Input with Separate Volume Aux-In Headphone Jack Pre-Amp Out Tilt Back Design 475 x 320 x 305mm 12 Kg

  • Fishman Loudbox Mini Acoustic Amplifier

    Fishman Loudbox Mini Acoustic Amplifier

    The Loudbox Mini delivers the tonal quality that has made the Fishman name the standard for great acoustic sound. The Mini packs 60 watts of clean acoustic power, and has two channels featuring Fishman’s legendary preamp and tone control designs. The amp also features digital reverb and chorus for the instrument channel and reverb for the microphone channel. The Loudbox Mini sports an MP3 input and balanced XLR D.I. output. Now with the addition of Bluetooth® wireless connectivity! Loudbox Mini features: Bluetooth® 4.0 Connectivity 60 Watts with Master Volume Two channels: Instrument & Microphone Digital Reverb & Chorus Master Volume 1/4” & 1/8” Auxiliary Input Balanced XLR D.I. output Lightweight & Portable Instrument Channel: 1/4” input for active or passive pickups Feedback-fighting Phase switch 3-band EQ: low, mid, high tone controls Reverb level Dual-function Chorus Microphone Channel: XLR input for dynamic microphones 2-band EQ with low and high tone controls Reverb level

  • Monterey 35w Acoustic Guitar Amp with Chorus

    Monterey 35w Acoustic Guitar Amp with Chorus

    The Monterey MCA-35CA Acoustic Guitar features 2 Channels, 10" Speaker, 2.5" Tweeter with Chorus and XLR and 1/4" Jack inputs with line out. Secifications: 35 Watt RMS Channel 1: XLR Input with Volume Channel 2: 1/4" Input socket for Instrument Volume Control Bass Mid & Treble Controls Chorus Switch with Speed Control RCA Input with Seperate Volume Line Out Headphone 1/4" Stereo Socket 10" Speaker 2.5" Tweeter

  • NU-X AC50 Stageman Acoustic Amplifier with Digital Effects

    NU-X AC50 Stageman Acoustic Amplifier with Digital Effects

    Stageman AC50 is designed to accurately reproduce the natural sound of your acoustic guitar and vocals. The front control panel has 2 identical channels and both are optimized for microphones and acoustic guitar inputs respectively. The dual-input channels, on the NUX Stageman acoustic guitar amplifier, provide you with even more options for small gigs or studio recording. Stageman’s chorus and reverb effects can be set individually on either of the 2 channels. The Instrument Channel chorus is a tasty vintage chorus with a smooth vibration and reverb effect ( plate reverb with 2 styles ) which you can dial-in at low-level short-decay reverb effect between 1 - 5 and high-level short-decay reverb effect between 5 - 10 parameters. The Mic Channel chorus is also a vintage chorus--but with less vibration. Its reverb effect is one of the best built-in hall reverbs you can find. It has super clean reflections intended to let you feel the architecture of a well-designed concert hall. Stageman has flexible outputs for both stage and recording applications, and is designed for your interface needs. XLR DI output and Line output jack can be used as an analog audio-out for recording or sending to a monitor. To accentuate your customized sound, Send/Return FX Loop inputs interface with any of your essential effects gear. It’s never easy to find the ideal speakers for instrument amplifiers, especially for the acoustic instruments. After hundreds of times of trying speakers from different suppliers, we eventually decided to customize our own speakers to capture the exact sound we wanted. We triumphed by combining two refined speakers (one: 1 inch tweeter and one: 6.5 inch woofer ) into Stageman’s cabinet. Equipped with this creative 2-way high-sensitivity speaker system, Stageman delivers incredible sound dynamics. To top it off, our cabinet design features a beveled-angle carefully calculated to provide optimal live sound monitoring. Stageman’s EQ and Effects offer a wide range of dynamic controls and, with the 2-way high-sensitivity speakers, you get on-the-fly studio quality sound, and the exact tone you need with the turn of a dial. Both the Stageman App and Bluetooth Control Pedal are custom-designed to give you wireless versatility wherever you play. They’re also the keys to unlock Stageman’s hidden features: 20 banks of well-selected Drum sequences, a 40 Loop Station, and unlimited Overdubs. (Stageman App is currently available on the APP Store. Bluetooth control pedal is an optional accessory.) Specifications: 2 Channels Channel 1 - 1/4-inch jack instrument input Channel 2 - 1/4-inch jack and XLR combined mic input 3 band EQ (Bass - Mid - Treble) and Phase switch independent for each channels Chorus and Reverb effects 50 watt RMS 1 x 6.5 inch Woofer, 1 x 1 inch Tweeter High sensitive speaker, great dynamic. XLR DI OUT Line OUT 3.5mm (1/8) Aux-in FX Loop (Send/Return) Built-in 60 seconds Looper function Built-in drums 20 rhythm styles Bluetooth Footswitch to control effects and Jam function simultaneously (optional, sold seperately) Stageman App to control effects and Jam function (Free to download for iOS and Android)

  • NU-X Acoustic 30 Digital Acoustic Amplifier

    NU-X Acoustic 30 Digital Acoustic Amplifier

    NUX Acoustic 30 is designed for acoustic guitar singers! It is very faithful to the original tone of your beloved guitar! It has independent guitar and microphone channels. Each channel has its own volume, 3-band EQ and Chorus effect. With the anti-feedback function and Reverb effect, NUX Acoustic 30 is all you need for your next gig! Features: 30 Watts 10” Dual-Cone Speaker Guitar and microphone channels with independent volume, EQ and Chorus effects Built-in Tuner Anti-feedback function Reverb effect AUX In jack for external music player Line Out and Phone Out

  • NU-X NMP-4 Bluetooth Footswitch Pedal

    NU-X NMP-4 Bluetooth Footswitch Pedal

    NMP-4 is a wireless controller designed for NUX STAGEMAN acoustic guitar amplifier, with it you can access to STAGEMAN’s hidden features: Loop & Drum Machine and use it as hands-free on/off switch for on-board Chorus and Reverb effects. Turn both devices on, pair them up, ready for gigging. Can be powered by 2 x AA Alkaline Batteries or 5V USB Power Supply  

  • NU-X PA-50 Personal Monitor

    NU-X PA-50 Personal Monitor

    NUX PA-50 is a powered monitor designed for e-drums, vocals, keyboards, acoustic and electric instruments. Being a full range powered monitor, PA-50 can fully present the richness of tone characteristic of all kinds of instruments. Dual channel input, 3-band equalizer, 1" tweeter and 6.5" woofer, PA-50 is perfect for small gigs, studio recording or even live stage performance. Channel 1 - 1/4 unbalanced input, designed to plug any instrument directly including acoustic guitar, digital piano and keyboard, and electronic drums.Channel 2 - combo 1/4 unbalanced and XLR balanced input and designed to plug everything including the microphones. Full Range, Flat Response (FRFR) NUX PA-50 personal monitoring amplifier has a flat frequency response and is equipped with a full range dynamic speaker and the input of each channel has independent EQ curve. Channel 1 is improved for dynamic sound and designed to enhance LOW and HIGH frequencies. Channel 2 is totally FLAT with a great accuracy and designed for direct compatibility for an IR loader such as NUX Solid Studio. And you can take the advantage of using the sound (profile) of any guitar amplifiers everywhere. And use the 3-band EQ and you can fine-tune your output to get a perfect result.   Connection Tip:You can connect any speaker cabinet simulator pedal or an IR loader to Input 2. Features: Dual input Channels, 1 x 1/4” unbalanced input jack and 1x 1/4” balanced XLR input jack 3 band equalizer, independent volume control for each channel Power Output: 50W RMS Speakers: High sensitive 6.5” woofer, 1” tweeter AUX-IN and AUX OUT Jack Frequency Response: 50-20Hz (-3dB) Power Supply: AC100~120V, AC220~240V (50/60Hz) Power consumption: ≤88W Dimensions: 361mm x 364mm x 325mm Weight: 11.5 kg EQ Specifications Bass: ±10Hz@80Hz(shelving) Middle: ±10Hz@1.8Hz(peaking) Treble: ±10Hz@15Hz(shelving) Input Impedence Channel 1: 2.2MΩ Channel 2: 100 KΩ AUX Input: 6.6 KΩ    

  • RMS Acoustic Multi Use Amp AC-20C

    RMS Acoustic Multi Use Amp AC-20C

    The RMS AC-20C 20 Watt Acoustic Amplifier has a separate Microphone Channel and a Guitar Channel with Chorus and Reverb.You can also use this amp with Electric Guitars, Bass Guitars, Drum Machines, CD Players or any other preamped signal. Grey Carpet Covering. Specifications: RMS 20 Watt Acoustic Amplifier 8" Speaker 2" Tweeter Twin Channel Channel 1 Microphone/Line Input 3 Pin Microphone Input for Low Impedance Mic CD RCA Inputs Volume Level Control for Mic & CD/Line Channel 2 Instrument Input 1 x 1/4" Input with Active & Passive Selector Switch Guitar Volume Control Low, Mid & High EQ Controls with Mid Frequency Control Reverb Control Reverb On/Off Switch Chorus Control Chorus On/Off Switch Line Out Grey Carpet Covering 14" High x 16.5" Wide x 10" Depth 10 Kg

/
Displaying 1 to 9 (of 10 products)