PVi 2 Dynamic Cardioid Microphone in Black with 6m XLR-Jack Cable, Carrying Pouch & Mic clip. Features: High quality, cost effective On/off switch in handle Clean, natural sound Cardioid unidirectional polar response Low pop and handling noise Rugged, die cast steel case Low-gloss black finish 6 meter XLR-QTR cable included Element Type: Dynamic Pickup Pattern: Cardioid Impedance: 500 ohm Maximum SPL: 150 dB Frequency Response: 50 Hz~16 kHz Sensitivity (open circuit voltage): -50 dBV/Pa Weight Unpacked: 1.63 lb(0.739 kg) Weight Packed: 1.90 lb(0.862 kg) Width Packed: 7.75"(19.685 cm) Height Packed: 11"(27.94 cm) Depth Packed: 3"(7.62 cm)
PVi 2 Dynamic Cardioid Microphone in Black with 6m XLR-XLR Cable, Carrying Pouch & Mic clip. Features: High quality, cost effective On/off switch in handle Clean, natural sound Cardioid unidirectional polar response Low pop and handling noise Rugged, die cast steel case Low-gloss black finish 6 meter XLR-XLR cable included Element Type: Dynamic Pickup Pattern: Cardioid Impedance: 500 ohm Maximum SPL: 150 dB Frequency Response: 50 Hz~16 kHz Sensitivity (open circuit voltage): -50 dBV/Pa Weight Unpacked: 1.63 lb(0.739 kg) Weight Packed: 1.90 lb(0.862 kg) Width Packed: 7.75"(19.685 cm) Height Packed: 11"(27.94 cm) Depth Packed: 3"(7.62 cm)
The PVX 12 passive loudspeakers deliver superior sound quality by utilizing advanced materials like its lightweight, roadworthy molded polypropylene exterior. Lightweight, durable and voiced for live music or speech applications, these two-way speaker systems will handle 400 watts program and 800 watts peak power and feature heavy-duty woofers, 2-3/8" voice coils and the Peavey RX14™ 1.4" titanium diaphragm compression driver coupled to a constant directivity horn. Features: 400 watts program 800 watts peak Top, bottom and right side flying point inserts Full-coverage heavy-duty perforated steel grille, with powder-coat finish Rugged Construction Patented, asymmetrical Quadratic Throat Waveguide™ Technology - 100º by 50º coverage. 15º upward and 35º downward directing sound to your audience RX14™ Titanium Compression Driver Weight Unpacked: 37.00 lb (16.78 kg) Weight Packed: 43.00 lb (19.51 kg) Width Packed: 20" (50.8 cm) Height Packed: 26.75" (67.95 cm) Depth Packed: 18.25" (46.36 cm)
The PVX 15 passive loudspeakers deliver superior sound quality by utilizing advanced materials like its lightweight, roadworthy molded polypropylene exterior. Lightweight, durable and voiced for live music or speech applications, these two-way speaker systems will handle 400 watts program and 800 watts peak power and feature heavy-duty woofers, 2-3/8" voice coils and the Peavey RX14™ 1.4" titanium diaphragm compression driver coupled to a constant directivity horn. Features: 400 watts program 800 watts peak Top, bottom and right side flying point inserts Full-coverage heavy-duty perforated steel grille, with powder-coat finish Rugged Construction Patented, asymmetrical Quadratic Throat Waveguide™ Technology - 100º by 50º coverage. 15º upward and 35º downward directing sound to your audience RX14™ Titanium Compression Driver Weight Unpacked: 47.00 lb (21.32 kg) Weight Packed: 53.79 lb (24.4 kg) Width Packed: 21.63" (54.93 cm) Height Packed: 31.63" (80.33 cm) Depth Packed: 20.38" (51.75 cm)
The PVXp™ 12 DSP features a reliable bi-amped power section that provides a total of 830 Watts of peak available dynamic power. With that much available power, speaker protection is critical. Advanced digital signal compression prevents audible overload, protecting the speakers from harmful distortion at high output levels. This powered enclosure also includes heavy duty speaker drivers; it features a 12" woofer with a 2-3/8" voice coil and a 50 oz. magnet. This is coupled with the RX14 compression driver that includes a 1.4" titanium diaphragm on a 100-degree horizontal x 50 degree vertical pattern asymmetrical horn. The PVXp™ 12 DSP provides a balanced input via a combination jack that accepts a balanced TRS 1/4" input, as well as a balanced XLR input and summed RCA jacks. There are two balanced Thru outputs, a male XLR and a 1/4" TRS. The LCD display and EQ presets, along with other operating parameters are accessed via a one-knob selector. Features: Two-way bi-amplified analog amp powered speaker system DSP I/O is at 48 kHz and 24 bits, with low-jitter, professional grade components Fan cooled for maximum reliability Peavey Exclusive Quadratic Throat Waveguide™ technology, 100 by 50 degree coverage DSP processing is 64 bit double-precision Input is via a combo female XLR and 1/4" TRS phone jack with balanced input A Mic/Line switch provides for two different gain settings Thru output is via a male XLR jack and 1/4" TRS phone jack Multiple Factory Preset EQ settings Rugged plastic injection-molded trapezoidal enclosure 630 watts peak dynamic woofer power, 200 watts peak dynamic tweeter power Full-coverage perforated steel grille, with powder coat finish RX™ 14 compression driver, with 1.4 inch titanium diaphragm Pole mount molded-in for 1 3/8" diameter poles 12" heavy-duty woofer with a 2-3/8" voice coil & 50 oz. magnet Top, bottom and right side flying point inserts Asymmetrical horn aims the sound down 10 degrees, at the audience, not over their heads Weight Unpacked: 42.00 lb (19.05 kg) Weight Packed: 48.00 lb (21.77 kg) Width Packed: 20" (50.8 cm) Height Packed: 26.75" (67.95 cm) Depth Packed: 18.25" (46.36 cm)
The PVXp™ 15 DSP features a reliable bi-amped power section that provides a total of 830 Watts of peak available dynamic power. With that much available power, speaker protection is critical. Advanced digital signal compression prevents audible overload, protecting the speakers from harmful distortion at high output levels. This powered enclosure also includes heavy duty speaker drivers; it features a 15" woofer with a 2-3/8" voice coil and a 50 oz. magnet. This is coupled with the RX14 compression driver that includes a 1.4" titanium diaphragm on a 100-degree horizontal x 50 degree vertical pattern asymmetrical horn. The PVXp™ 15 DSP provides a balanced input via a combination jack that accepts a balanced TRS 1/4" input, as well as a balanced XLR input and summed RCA jacks. There are two balanced Thru outputs, a male XLR and a 1/4" TRS. The LCD display and EQ presets, along with other operating parameters are accessed via a one-knob selector. Features: Two-way bi-amplified analog amp powered speaker system DSP I/O is at 48 kHz and 24 bits, with low-jitter, professional grade components Fan cooled for maximum reliability Peavey Exclusive Quadratic Throat Waveguide™ technology, 100 by 50 degree coverage DSP processing is 64 bit double-precision Input is via a combo female XLR and 1/4" TRS phone jack with balanced input A Mic/Line switch provides for two different gain settings Thru output is via a male XLR jack and 1/4" TRS phone jack Multiple Factory Preset EQ settings Rugged plastic injection-molded trapezoidal enclosure 630 watts peak dynamic woofer power, 200 watts peak dynamic tweeter power Full-coverage perforated steel grille, with powder coat finish RX™ 14 compression driver, with 1.4 inch titanium diaphragm Pole mount molded-in for 1 3/8" diameter poles 15" heavy-duty woofer with a 2-3/8" voice coil & 50 oz. magnet Top, bottom and right side flying point inserts Asymmetrical horn aims the sound down 10 degrees, at the audience, not over their heads. Weight Unpacked: 52.00 lb (23.59 kg) Weight Packed: 58.00 lb (26.31 kg) Width Packed: 21.63" (54.93 cm) Height Packed: 31.63" (80.33 cm)
Peavey Electronics® set the standard for affordable, feature-packed powered P.A. solutions more than four decades ago. The new Peavey PVX™ Series of active and passive loudspeakers are the culmination of decades of R&D and experience building the best portable, all-in-one audio solutions, bringing legendary Peavey performance and reliability to audio pros and musicians of all levels. Continuing the PVX™ Series, the PVXp Sub from Peavey features an ultra-reliable power section that provides a total of 800 watts of peak available power with DDT™ compression. This powered enclosure also features a 15" heavy-duty woofer with a 3" voice coil. The PVXp Sub provides a balanced input via a combination jack that accepts balanced TRS 1/4" input as well as a balanced XLR input. There are two balanced thru high pass XLR outputs, and a Full-Range XLR output. There is an adjustable Level control, as well as a combination LED indicator, that illuminates when power is on and when the "soft-limiting" DDT circuit is activated. Peavey PVXp Sub is housed in a durable enclosure that includes a pole mount for additional PVX speakers, a black powder-coated steel grille provides driver protection and a clean, professional appearance. Features: 15" heavy-duty woofer Internal line level low-pass/high-pass crossover network Fully adjustable KOSMOS® C for increased bass impact XLR/one quarter inch combo jack input Power amp has forced air cooling for maximum reliability Large heavy-duty locking casters Perforated steel grill Steel handles T-nut woofer mounting Rugged dado and rabbet construction plus internal braces for lightweight yet strong cabinet 800 watts peak available power Compact dimensions for a 15" woofer based sub Threaded pole for top speaker mount Two high-pass XLR outputs, one full range thru XLR output Weight Packed: 88.98 lb (40.36 kg) Width Packed: 29" (73.66 cm) Height Packed: 30" (76.2 cm) Depth Packed: 21" (53.34 cm)
Sound of Tube Amps & the Reliability of Solid-State The Peavey Rage 158 15W Guitar Amplifier features 2 channels and 2 radically different voicings -- Modern and Vintage. The Modern position maintains a warm, standard voicing while the Vintage position adds a hint of brightness to emulate some classic amp designs. Pre and post gain knobs, 3-band EQ, a headphone jack, and a tape or CD input make this hard-hitting little amp perfect for back porch jamming or solo practice. Features: Two switchable channels: clean and lead 3-band EQ Tape/CD input Modern/vintage voicing switch Headphone jack 15 watts (rms) Weight Unpacked: 13.50 lb(6.123 kg) Weight Packed: 17.00 lb(7.711 kg) Width Packed: 15.37"(39.0398 cm) Height Packed: 16.37"(41.5798 cm) Depth Packed: 10.25"(26.035 cm)
The basic building blocks of the TransTube® sound are the exclusive designs of the preamp and power amp. The preamp section tailors gain to meet the need for any amount of drive, from crystal clear to thick, smooth sustain. The power amp reacts just like a tube output section by responding to the preamp with natural compression that increases as the amp gets louder. With TransTube®, you get a killer amp with widely ranging dynamics and natural "grit," just like a tube amp! Features: 8 inch super-duty Blue Marvel® speaker Two switchable channels: clean and lead 3-band EQ 1/4" Aux input Modern/vintage voicing switch Headphone jack 25 watts (rms) Weight Unpacked: 17.50 lb(7.938 kg) Weight Packed: 21.00 lb(9.525 kg) Width Packed: 10"(25.4 cm) Height Packed: 17.87"(45.3898 cm) Depth Packed: 15.62"(39.6748 cm)
Copyright © 2024 BC Wholesalers
