The Bass Max is very sturdy and has a high output signal that is balanced over the whole tone range. It is suitable for both arco and pizzicato playing styles because it transmits a broader mid frequency range. This enables the musician to change playing modes without having to adjust the amplifier. The connection jack is held in place by a special attachment clamp mounted at the A and D strings between string-holder and bridge. The wrapped cable eliminates disturbance. One Bass Max will evenly pick up the tone range of the double bass. It works very well with smaller bass combo amps. Specifications: Diameter: 22 mm Thickness: 5 mm Output impedance: high ohmic Output: 1/4" Connection cable length: 6"
The Big Shot is a single-head piezo pickup, especially designed for bigger instruments with low mechanical resonance. The extra strong output signal makes it a versatile choice for a variety of instruments. These include instruments made of relatively thick material, such as the sound board of a piano. Made in USA by K&K Sound.
The Double Big Twin is a four-head upright bass transducer developed specifically for jazz bass players. Its transmission band includes very high and very low frequencies, which makes it especially suitable for jazz bass. The high frequency translation ensures a clean amplification of the finger attack with the picked bass. The low frequency translation refers to a desired very bassy sound picture. The Double Big Twin is able to pick up each string of the upright bass separately. This results in an extraordinary balance of sound, even for pizzicato playing. The Double Big Twin is easily installed with the supplied double-sided adhesive film and doesn't require modification of the instrument itself. A special attachment clamp holds the connection jack so that it can be mounted at the A and D strings between the string-holder and bridge. We highly recommend one of our K&K preamps for impedance adaptation and pre-amplification. Specifications: Diameter of each transducer head: 3/4" Height of each transducer head: 1/32" Output impedance: high ohmic Length of connection cable: 1 ft Output: Stereo 1/4" jack, soldered mono mode
The FanTaStick is an undersaddle transducer that was developed to stay true to K&K's mission of capturing the most natural guitar sound possible. Made in USA. Other undersaddle pickups tend to overemphasize the signal from the strings and lose the corpus vibrations that makes a guitar unique. We created a super-light production technique to solve this problem: Only ultra-thin material surrounds the piezo-crystals to ensure that the corpus vibrations reach the crystals with virtually no interference. This means that electronic post-processing to improve the sound is not required. Additional, this production method also has the benefit of making the FanTaStick extremely flexible to fit any arched base. To balance the volume of each string, we measure each crystal separately within a nano-inch range. Only six crystals of exactly the same height are combined in one FanTaStick. Each crystal is fit in according to a defined direction of polarization. Even playing in "open tunings" is possible, because the FanTaStick can function with lower string pressure than many of its competitors. The FanTaStick can be directly connected to an amplifier or mixer. However, we highly recommend one of our K&K preamps for optimum adaptation of impedance of this extremely high-ohmic pickup to standard line or amplifier inputs. FanTaStick Classic (for nylon string guitars) Possible E-e string distance: 56mm - 60mm Height:1.6mm Width: 2.3mm Cable length: 1 ft.
The FanTaStick is an undersaddle transducer that was developed to stay true to K&K's mission of capturing the most natural guitar sound possible. Made in USA. Other undersaddle pickups tend to overemphasize the signal from the strings and lose the corpus vibrations that makes a guitar unique. We created a super-light production technique to solve this problem: Only ultra-thin material surrounds the piezo-crystals to ensure that the corpus vibrations reach the crystals with virtually no interference. This means that electronic post-processing to improve the sound is not required. Additional, this production method also has the benefit of making the FanTaStick extremely flexible to fit any arched base. To balance the volume of each string, we measure each crystal separately within a nano-inch range. Only six crystals of exactly the same height are combined in one FanTaStick. Each crystal is fit in according to a defined direction of polarization. Even playing in "open tunings" is possible, because the FanTaStick can function with lower string pressure than many of its competitors. The FanTaStick can be directly connected to an amplifier or mixer. However, we highly recommend one of our K&K preamps for optimum adaptation of impedance of this extremely high-ohmic pickup to standard line or amplifier inputs. FanTaStick Western (for steel string guitars) Possible E-e string distance: 54mm - 58mm Height: 1.6mm Width: 2.3mm Cable length: 1 ft.
This single-head piezo transducer is a small, universal, entry level transducer with a better than entry level sound. It is perfect for smaller instruments and it can be used for hand drums and many other percussion instruments. Made in USA
The Pure Classic is passive system for classic guitar, with four pickup heads and an endpin jack. It is a transducer systems only and does not include a battery or on-board electronics. Don't be fooled by the sound of some competitors' "thin sounding" passive systems--the Pure Systems are definitely different. They sound full and rich and have sufficient output to drive most amps and PA systems directly! Made in USA,
With 3 Tranducer pickup heads it super balanced, flat sound transmission, warm woody tone without any quack and superior dynamic range all over the guitar's frequency spectrum.This pickup won the silver medal in the 2006 worldwide readers' poll of Acoustic Guitar Magazine. Made in USA.
The Pure Piano consists of three transducer heads, each one of them tailor-made to fit their defined frequency range. The system was developed in cooperation with the renowned German piano manufacturer Seiler Pianos. The Pure Piano guarantees an impressively natural, clean, and balanced sound as well as a quick installation. It delivers a high output volume and exquisite frequency range. Each of the three transducer heads has been specifically processed to fit the bass, mid, and descant tone ranges. This is especially important in order to avoid an exaggerated hammer-sound in the high keys. The three pickup discs are connected to a sturdy studio-quality metal jack to ensure reliable contact over a long period of time. With the Pure Piano, clean and separate transmission is provided for any piano or grand piano, be it on stage or in the studio. Technical Specs Diameter transducer heads: 1 x 1/2". 2 x 3/4" Transducers head height: 1/32" Impedance: High ohmic Output: Quarter inch
Copyright © 2025 BC Wholesalers
