Cardioid directional acoustic boundary microphone. Suit-able for live sound, or record-ing with background noise. Features: Three position switch with bass roll-off function Powered by either phantom or 1.5V battery Die cast bottom with rubber pad Wide frequency response Surface mount Applications: Speech Conference Specifications: Type: Back electret Condenser Polar Pattern: Cardioid Sensitivity:Phantom-44dBV/Pa (7.9mV/Pa), Battery -45dBV/Pa (6.3mV/Pa) Impedance: Phantom 200Ω; Battery 270Ω Minimum Load Impedance:Phantom 1000Ω Max. SPL:Phantom 134 dB, Battery 120 dB(THD≦1% 1000Hz) Dynamic Range:115 dB Power Supply: Phantom 9-52V DC 2mA or Battery 1.5V AA (Um3) Low cut filter:below 80Hz -18dB/OCT Current consumption: Phantom 2mA Bass roll-of:80Hz, 12dB/oct Weight :Mic 110 g, PS418D 280g
The D109 is a high impedance, supercardioid dynamic microphone. It has a flat mesh grille, which is a effective pop screen filter against wind noise and close miking. The D109 is an ideal microphone for vocal reinforcement from a guitar amp with a high impedance microphone input or other high impedance input devices. Features High-impedance output Clean instrument pick up High gain before feedback Neodymium magnet with double convex diaphragm High signal to noise ratio Application Guitar Amplifier Microphone High-Impedance Input Device Specifications Type: DynamicPolar Pattern: Supercardioid Frequency Response: 80-12,500 Hz Sensitivity: -38 dBV/Pa (12.6 mV)Output Impedance: 20k ΩMin. Load Impedance: 100k ΩMax. SPL: 130 dB SPLFinish: Titanium greyConnector: XLR3MDimensions: Ø48 × 173 mm (Ø1.89" × 6.81")Net Weight: 340 g (12 oz)Accessories Furnished: 6-meter mic cable with XLR3M to 6.3 mm TS connector;HM38S clip with screw knob;YA2 threaded adapter;PouchOptional Accessories: CP838 low impedance balanced output converter;S40 windscreenPackaging: Colorful outer packaging
The D109 is a high impedance, supercardioid dynamic microphone. It has a flat mesh grille, which is a effective pop screen filter against wind noise and close miking. The D109 is an ideal microphone for vocal reinforcement from a guitar amp with a high impedance microphone input or other high impedance input devices. Features High-impedance output Clean instrument pick up High gain before feedback Neodymium magnet with double convex diaphragm High signal to noise ratio Application Guitar Amplifier Microphone High-Impedance Input Device Specifications Type: DynamicPolar Pattern: Supercardioid Frequency Response: 80-12,500 Hz Sensitivity: -38 dBV/Pa (12.6 mV)Output Impedance: 20k ΩMin. Load Impedance: 100k ΩMax. SPL: 130 dB SPLFinish: Titanium greyConnector: XLR3MDimensions: Ø48 × 173 mm (Ø1.89" × 6.81")Net Weight: 340 g (12 oz)Accessories Furnished: 6-meter mic cable with XLR3M to 6.3 mm TS connector;HM38S clip with screw knob;YA2 threaded adapter;PouchOptional Accessories: CP838 low impedance balanced output converter;S40 windscreenPackaging: Colorful outer packaging
The PRO248 microphone is a professional dynamic supercardioid microphone incorporating reinforced grille, neodymium magnets and an aluminum voice coil on a double membrane diaphragm. Its outputtransformer gives the PRO248 a wide frequency response, high sensitivity, better directivity and natural sound with more detail. The PRO248 is suitable for professional live stage performance and studio recording. Features: Typical vocal frequency response Powerful on the low frequency band, more texture detail on the high frequency band High gain before feedback ABS Microphone Case Included Microphone Clip Included. Application: Lead Vocal Back-Up Vocal Type: DynamicPolar Pattern: SupercardioidFrequency Response: 50-16,000 HzSensitivity: -54 dBV/Pa (2 mV)Output Impedance: 300 ΩMin. Load Impedance: 300 ΩMax. SPL: 150 dB SPLFinish: Titanium blueConnector: XLR3MDimensions: Ø52 × 165 mm (Ø2.05" × 6.5")Net Weight: PRO248: 270 g (9.5 oz);PRO248S: 285 g (10 oz)Accessories Furnished: HM38S clip with screw knob;YA2 threaded adapterPackaging: A1 protective carrying case; Colorful outer sleeve
The PROH7F MKII is a supercardioid microphone with perfect performance and a classic appearance. Those customers who fondly remember the past, particularly the 50's and 60's golden age of jazz music, will find this microphone especially appealing. Though the PROH7F MKII looks like a vintage instrument, its technical performance is substantially modernized with very advanced specifications adapted to a variety of vocal miking uses. Features: Classic and elegant in appearance with a contemporary performance Shock-mounted cartridge for minimized mechanical and vibration noise A self-tensioning swivel mount permits tilting 45° toward as well as up to 80° away from an audio source for greater flexibility External On/off switch Polished chrome finish for long-term operation and appearance Applications: Lead Vocals Backup Vocals Spoken Word Specifications: Type: DynamicPolar Pattern: Supercardioid Frequency Response: 50-15,000 Hz Sensitivity: -55 dBV/Pa (1.8 mV)Output Impedance: 300 ΩMin. Load Impedance: 1,000 ΩMax. SPL: 134 dB SPLFinish: Chrome platedConnector: XLR3MDimensions (W × H × D): 56 × 191 × 67.5 mm(2.2" × 7.5" × 2.66")Net Weight: 520 g (18.3 oz)Accessories Furnished: Pouch, YA2 threaded adapterPackaging: Colorful outer packaging
Copyright © 2023 BC Wholesalers