The Flanger FC-20 is the easiest way to send your instruments signal into an iPhone, iPod Touch or iPad. Just plug the FC-20 into the device's headphone jack,your instrument into the FC-20, and connect the output of FC-20 to an amplifier or another device that has line input, like a mixer, keyboard, or a synthesizer. Listen to the sound through headphones and the output jack will automatically mute. The 6.35mm input jack is designed for guitar,bass and also applicable for keyboards, microphones mixers etc. The 6.35mm output jack can be connected to an amplifier. Features 3.5mm stereo headphones jack. The 3.5mm input plug connects to your Iphone. Compatible with Iphone/Ipad apps: effects, tuners, metronomes, tone generators, recorders, amps etc.
Pocket Port is very small and easy to use! Don’t be fooled by its size. Pocket Port is a very professional USB audio interface specially designed for guitar recording! With 24 bit resolution at 192 kHz sample rates, you are able to have high quality music recording! Features: Guitar Input Phones Output 192KHz/24bit USB Interface In/Out Volume control Input:1 mono channel Output:1 stereo channel Sampling:24bit Sampling rate:44.1/48/88.2/96/192khz Input level: -20dBu Interface:USB 2.0 Power consumption:140mA Dimensions:80(L) x 59(W) x 22(H)mm Weight:67 grams
Designed for plug and perform convenience, noise-free digital-to-analog conversion and, of course, the rigors of the road, the On-Stage DB2150 DI Box features 2.0 full speed USB connection, 10hz to 20Khz frequency response and 90db dynamic range. Automatically recognized as an available sound card by all Windows and Mac operating systems, the DB2150's discrete, stereo-balanced XLR outputs provide pre-mix level and signal integrity monitoring via the 3.5mm headphone jack, while iso left/right and mono-sum switches guard against phase issues and facilitate monophonic transference. And because the last thing you need is hum, custom-wound resistors isolate and eliminate ground loops. Features: 2.0 full speed USB connection Automatically recognized as an available sound card by all Windows and Mac operating systems Custom wound transformer isolation eliminates ground loops Specifications: Application: Computers, mp3 players, projectors, and DJ equipment Input: USB 2.0 Output: XLR (stereo), 3.5mm headphone Mono Sum: Yes Ground Lift: Yes Iso Switch: Yes Frequency Response: 10Hz - 20kHz Sample Rate: 96k Dynamic Range: 90dB Output Impedance: 200 Ohms Construction: Metal w/ nylon bumpers Dimensions: 5.75" x 3.5" x 1.5" Weight: 0.70 lbs.
USB 3.0 SuperSpeed Audio Converter for Mac and PC Take your sound new heights with the high-speed, high-resolution, low-latency, and ultra-portable UAC-2 SuperSpeed USB 3.0 Audio converter. The bus-powered UAC-2 adds two channels of 24-bit/192 kHz high-resolution audio to any USB 2.0 or 3.0-equipped Windows or Mac computer—even to your iPad.* It utilizes SuperSpeed USB 3.0 technology for low latency and includes advanced features such as 4x upsampling, Loopback, and MIDI I/O. Plug in any microphone, line-level device, or instrument and use the UAC-2 for onstage playback, recording to a DAW, or enjoyment of high-res audio in your home or office. You can also use it for fast, low-latency podcasting, gaming, and other live streaming applications. * Optional power adapter and Apple Camera Connection kit or Lightning to USB Camera Adapter required Live performance Now you can get the best out of your laptop at every gig. The UAC-2 is portable, bus-powered (no AC connection required), and built rugged for the road, plus its advanced converters and support for USB 3.0 SuperSpeed ensures superior audio wherever your music takes you. Webcasting, podcasting, gaming, and live-streaming Broadcast your creativity, enhance your gaming experience, and share your performance with the world. The UAC-2's Loopback function combines the input from connected mics, instruments, and line-level devices along with background music or other audio tracks being played back by your computer and then instantly routes a custom blend of the signals to your streaming software. Recording and archivingPair a UAC-2 with your DAW and create great audio in any recording environment. Connect a wide variety of microphones, line-level devices, and instruments. Use Direct Monitoring for zero-latency overdubbing. Sync your MIDI controllers, sound modules, and drum machines. Archive your favorite recordings in high-resolution formats. The UAC-2 provides everything you need, in one compact device. MIDI The UAC-2's MIDI input and output connectors ensure rock-solid synchronization between your computer and devices such as electronic keyboards, controllers, drum machines, and synthesizer or sampler modules. Desktop audio enhancement Think your headphones and speakers already sound pretty great? Treat yourself by plugging them into the UAC-2 instead of your computer's audio outputs. Now you can enjoy the ultimate in streamed high-resolution audio—all the way up to 24-bit/192 kHz—in full fidelity. Complete connectivity The UAC-2 works with everything from legacy USB 2.0 laptops and desktops, all the way up to the latest-generation Mac or Windows USB 3.0-equipped computers. Or plug in an AC adapter and Apple Camera Connection kit or Lightning to USB Camera Adapter (sold separately) and use it with your iPad. USB 3.0 SuperSpeed The SuperSpeed USB 3.0 transfer protocol supported by the UAC-2 is ten times faster than USB 2.0 and six times faster than FireWire 800. The result? Low-latency (2.2ms roundtrip @ 96 kHz/32 samples) for improved performance from your DAW software, and a stable data stream that is unaffected by computer jitter (slight variations in timing), so there's no need to connect an external master clock source. What's more, the extra bus voltage carried by USB 3.0 (900 mA, as opposed to the 500 mA carried by USB 2.0) allows for the use of higher-end electronic components such as the advanced preamps and converters in the UAC-2. The Hardware The USB 3.0 connector on the rear panel carries digital signal to and from your computer in addition to providing power to the UAC-2—no batteries or external power required. Dual front panel combo XLR/TRS inputs allow you to connect a wide variety of microphones as well as line-level signals from electronic keyboards and music players—even passive instruments such as electric guitars and basses. Dual-balanced TRS output jacks enable you to connect the UAC-2 to amplifiers or self-powered speakers, and there's an independent ¼" stereo headphone jack with dedicated volume control for private monitoring of the input or output signal. Dedicated input gain controls and Clip LEDs make it easy to set optimum input levels, and a large Output knob enables fast control over overall output level. A phantom power switch applies +48 volts to the mic inputs, allowing you to use the UAC-2 with studio-quality condenser microphones, and a three-way Direct Monitoring switch enables monitoring of input signal with zero latency in both mono and stereo. MIDI In and Out connectors allow interfacing with devices such as electronic keyboards and drum machines. Last but not least, a Class Compliant Mode switch enables the UAC-2 to be connected to an iPad.* * Optional power adapter and Apple Camera Connection kit or Lightning to USB Camera Adapter required Upsampling The UAC-2 uses high-end components such as the Burr Brown PCM4202 analog-to-digital converter and AKM AK4396 digital-to-analog converter. In addition, the UAC-2 performs 4-times upsampling during both analog-to-digital (A/D) and digital-to-analog (D/A) conversion. In other words, when the sampling frequency is set to 44.1 kHz or 48 kHz, the UAC-2 processes the signal at high resolution 176.4 kHz or 192 kHz. For A/D conversion, this means less aliasing noise; for D/A conversion, this means increased clarity and fidelity. Extend your capabilities with software UAC-2 MixEfx is a free Macintosh and Windows compatible application designed specially by Zoom for the UAC-2. With UAC-2 MixEfx, you can set mix parameters and add high-quality effects such as reverb and echo. Other features include a low cut filter, phase reverse, AUTO GAIN control for each input. UAC-2 MixEfx even has three memory slots for saving user settings with quick recall. State of the art editing with every interface The Zoom UAC-2 comes with a free download license for Steinberg’s Cubase LE music production software, providing not just the ability to capture incredible high-resolution / low-latency audio in every box, but to do spectacular things with it. Take your recordings to a more professional level. Steinberg’s powerful and state-of-the-art audio software used by creators around the world now comes with every Zoom UAC-2 and UAC-8 purchase. Currently shipping with:Cubase LE8 for Mac OS X 10.9/10.10 and Windows 7/8/8.1.
There’s a whole new world of possibilities for Mac and PC Creators — high-speed, high-resolution, and low-latency. Upgrade your rig with the rackmountable UAC-8, and add 18 inputs and 20 outputs to your USB 3.0-equipped Mac or Windows computer—even your iPad.* Plug in a microphone, line-level device, or instrument and start bringing your ideas to life, or take the UAC-8 onstage to enable high-res audio playback, all the way up to 24-bit/192 kHz. * Apple Camera Connection kit or Lightning to USB Camera Adapter required USB 3.0 SuperSpeed The SuperSpeed USB 3.0 transfer protocol used by the UAC-8, with a speed of 2.0 ms roundtrip @ 96 kHz / 32 samples, is ten times faster than USB 2.0 and six times faster than FireWire 800. That not only ensures low latency, it provides a data stream that's unaffected by computer jitter (slight variations in timing), so there's no need to connect an external master clock source. The Hardware INPUTSThe UAC-8 provides a wide variety of both analog and digital connectors. 8 front panel combo XLR/TRS inputs accept mic- and line-level signals, and you can even plug instruments directly into Inputs 1 and 2. Dedicated input gain controls and Clip LEDs make it easy to set optimum input levels, and a Phantom Power switch enables the use of condenser microphones. OUTPUTSThe UAC-8 has dual balanced analog TRS output jacks for connection to monitors, and there are also 8 discrete balanced TRS analog line outputs for multichannel monitoring or connection to external effects devices. A large front-panel Output knob offers fast control over output level, and there are two independent ¼" stereo headphone jacks, each with its own dedicated volume control, for private monitoring. DIGITAL I/O8 ADAT and stereo S/PDIF digital inputs/outputs allow for the connection of up to 10 external channels, and built-in Word Clock enables easy integration into any system. In addition, MIDI In and Out is provided to allow interfacing with devices such as electronic keyboards and drum machines. Upsampling, Standalone Mode The UAC-8 uses high-end components such as the AKM AK5388 analog-to-digital converter and AKM AK4413 digital-to-analog converter. In addition, the UAC-8 performs 4-times upsampling during both analog-to-digital and digital-to-analog conversion. In other words, when the sampling frequency is set to 44.1 kHz or 48 kHz, the UAC-8 processes the signal at high resolution 176.4 kHz or 192 kHz. For A/D conversion, this means less aliasing noise; for D/A conversion, this means increased clarity and fidelity. In standalone mode, the UAC-8 can be used as an 8-channel mic preamp and analog-to-digital or digital-to-analog converter without being connected to a computer. Extend your capabilities with software UAC-8 MixEfx is a free Macintosh and Windows compatible application designed specially by Zoom for the UAC-8. It provides a comprehensive onscreen mixer, with independent level, phase reversal, and panning control for each channel. UAC-8 MixEfx also allows you to freely route all inputs to all outputs and to create custom mixes. In addition, MixEfx features effects like reverb and echo, and complete mixes can be stored in three different memory slots, allowing instant recall. State of the art editing with every interface The Zoom UAC-8 comes with a free download license for Steinberg’s Cubase LE music production software, providing not just the ability to capture incredible high-resolution / low-latency audio in every box, but to do spectacular things with it. Take your recordings to a more professional level. Steinberg’s powerful and state-of-the-art audio software used by creators around the world now comes with every Zoom UAC-2 and UAC-8 purchase. Currently shipping with:Cubase LE8 for Mac OS X 10.9/10.10 and Windows 7/8/8.1.
Copyright © 2021 BC Wholesalers