DAMP Reverb (NRV-3) is a mini reverb pedal with 3 different reverb types including Plate, Spring, and Hall. You can switch the types by tapping the tap switch. Ambiance is the Rule Whether you’re a classic spring reverb fan, a studio rack aficionado, or an ambient soundscape creator searching for new sonic textures, DAMP reverb provides three different reverb types that makes everything musical and beautiful. Reverb Types Plate reverb was inspired by EMT 140, which made use of a metal plate suspended in a steel frame, that was able to recreate reverberations similar to those heard in an acoustic space; renowned studio reverb found on classic recordings. Spring reverb simulates the spring tank that a mechanical disturbance propagated in a spring by creating a mechanical oscillation. To achieve a “bouncy” tone, Spring reverb is a solid choice for adding a bottom-heavy dimension. Classic “surf” reverb; great for Rockabilly too!. Hall reverb is based on the legendary Lexicon 224 which was unleashed in 1978. We simplified the DECAY, LEVEL, and TONE controls. It has famously lush reverb tail which single-handedly defined the sound of an entire era. Large encompassing reverb with warm decay. DAMP reverb offers True-bypass and Buffer-bypass (Trails), just hold the footswitch to boot-up the pedal (do not connect USB). The footswitch indicator will show you the bypass status. (While you boot-up the pedal, if the FS indicator flashes “Green”=BF, “Red”=TB.) Mini but mighty! It also supports Stereo input & output. (Use 1/4” TRS plug, and choose Stereo mode.) *All of the brand and model names mentioned on this page are Trademarks of their respective owners, which are in no way associated or affiliated with NUX Effects and Cherub Technology CO. LTD. FEATURES: 3 reverb types in the mini enclosure Plate: Clear ambience. Renowned studio reverb found on classic recordings Spring: Bottom-heavy dimension flashback. Classic "surf" reverb; great for Rockabilly! Hall: Lush & large encompassing reverb with warm decay Holding footswitch for secondary function. (Shimmer, Freeze) True-bypass or Buffer-bypass (Trails) Supports Stereo I/O with TRS Cable Low power consumption. (less than 100mA) Analog dry signal for low noise and zero latency Mini but mighty! It also supports Stereo input & output (Use 1/4" TRS plug, and choose Stereo mode) The USB-C port is for firmware update. Connect USB cable to a PC and hold the footswitch to boot-up the device and to enter the DFU (Device Firmware Update) mode. Once connected you can do firmware updates using DFU updater software SPECIFICATIONS: Input Impedance: 1MΩ Output Impedance: 10kΩ Dynamic Range: 103 dB DSP Processing: 48KHz / 32-bit A/D D/A Sampling Rate: 48KHz / 24-bit Power: 9V DC (Negative tip, Optional ACD-006A adapter) Current Draw: Less than 100mA Dimensions: 94 x 51 x 53mm (L x W x H) Weight: 175g
Horseman NOD-1 Overdrive Pedal Gold and Silver Centaur s in one pedal, transparent overdrive. Two in One Overdrive Pedal One of the most sought-after dual overdrive pedals produced in the mid '90s is now in one unique pedal design-with a pocket size. NUX Horseman pays homage to the legendary Centaur pedal. There are 3 dials for primary settings and 2 modes: Gold and Silver, and it offers massive headway usually requiring an 18v input.Gold Mode mimics its classic predecessor; the transparent Gold Centaur overdrive pedal and the Silver Mode is a powered-up version with an extended gain range (Silver Centaur). NU-X Unique Design The sound is based on the Centaur's voltage converter circuit. But the Horseman's characteristic design is crafted with a built-in OP-AMP voltage-converter driving the 18V to OP-AMP. Higher voltage-supply orders-up more harmonics, and convincingly reproduces the sound of this unique pedal. Clean Boost Another “classic” way to use the NUX Horseman. Very useful when used in combination with the amplifiers drive channel (or any other drive pedal). And, depending on the Gain - Output adjustment, it lets the Horseman be used as a clean boost. Dial-up a low-gain with a high output setting, and it adds mostly volume and minimal color to your sound. Natural Distortion Additionally, the controls can be set to distort the sound signal in the pedal, where two Schottky diodes can perform a waveform clipping. ( The germanium diodes are discontinued, we especially select the Schottky diodes to replicate the waveform clipping ) The "gain" knob is a double potentiometer (a "dual-ganged gain pot"), which controls bass and middle frequencies. Treble and volume are each controlled with separate knobs. Our engineers would like to share the development story of the NUX Horseman. You can find more technical details about the Klon Centaur and NUX Horseman, CLICK HERE and visit our blog. True/Buffer Bypass NUX Horseman has an optional bypass mode. You can use the pedal in True Bypass mode to keep your signal untouched when the pedal is OFF in the chain. We highly recommend to select buffer bypass mode if you have more than 4 pedals connected together; switch to Buffer Bypass mode and there will be no signal loss in your pedal chain! Push and hold the footswitch and power-up the pedal; the LED indicator will show which bypass mode is activated; RED - True Bypass / GREEN - Buffer Bypass. Specifications: Gold and Silver modes: 2 independent pedal sounds in one mini stomp box Gain, Treble and Output Controls Voltage Converter Optional: True Bypass / Buffer Bypass Power: 9V Negative Tip
Lacerate is a mini pedal with a huge boost ! The unbelievably simple user-interface comes from our complex Dual FET Circuit Design, but don't worry about what's under the hood... just enjoy the one simple control knob, two Boost options and two Bypass modes. Features: Luminous knobs for checking on the dark stage Strong and lightweight aluminum die-cast chassis 9V center negative DC supply, 75mA current draw Weight: 174g / 6 oz Dimensions: 94 x 51 x 53mm (L x W x H) / 3.7 x 2.0 x 2.08inches (L x W x H) 2 Boost Modes: Clean Boost - In the Clean mode, Lacerate only boosts the signal, increasing the volume without any sound colorization. For this reason, Lacerate is one of the cleanest "clean boost" pedals available. Crank Boost - If you want fat, harmonically rich boost tone, just hold down the foot-switch (1 second) to engage the 2nd stage which adds your overdrive tone. Most boost pedals will only yield about + 20dB maximum, but Lacerate`s Crank mode gives you a whopping + 35dB . From average to huge! Higher Voltage, Increased Headroom & Dynamic - Lacerate has an integrated voltage-doubler which automatically changes 9V to 18V giving you ginormous headroom and dynamic. WARNING: To avoid damage to voltage doubler circuit, please ONLY use 9V Power Source. It will handle the conversion. True Bypass or Buffer Bypass Doubling the voltage to 18V gives you better dynamic, but it also creates a better headroom buffer. A lot of professional guitar players start their signal-chain with a stand-alone buffer. Lacerate has an embedded selectable buffer bypass You can change the bypass mode by turning on the power while holding the footswitch.
Engage the Morning Star foot-switch to add more overhead with saturated grit to your clean tones, and if you wanna’ boost your high-frequencies to a whole other stratosphere, press/hold the foot-switch to activate the Shine circuit which adds a whole new level of tone brightness. A Simple Pedal, Loaded with Massive Tone! 0 to 5 on the Drive-Knob yields a balanced overdrive to your clean tone. Tweak it up for thick overdrive with a bit more gain. The tone control has superb tone range from Dark to Morning Star bright. And, whenever you want your blues riffs to light up the skyline, the Shine circuit is always there waiting for your cue to come over the horizon. You also get 2 bypass options: True Bypass or Buffer Bypass for your essential signal chain needs. Specifications: Analog Overdrive Shine Circuit True Bypass / Buffer Bypass
Ampless? No worry, Pulse IR loader is the compact solution! Pulse (NSS-4) is a mini IR-Loader pedal with 3 different modes including EG CAB, BS CAB, and AG IR. You can switch the types by tapping the tap switch. Besides that, you can use Pulse as a silent practice tool (1/8” phone jack) in the end of your pedalboard and even as a USB recording interface onto DAW. EG CAB means electric guitar cabinet IRs. Pulse offers 8 guitar cab IRs: JZ120(Roland Jazz 120), DR112(Fender Deluxe Reverb), BS410(Fender Bassman 410), A212(VOX AC30 212), TR212(Fender Twin Reverb 212), 1960(Marshall 1960A 412), GB412(Celestion Greenback 412), V412(Celestion Vintage30 412). BS CAB means bass cabinet IRs. Pulse offers 8 bass cab IRs: AGL DB810(Aguilar DB 810), AMP SV810(Ampeg SV810), MKB 410(Mark Bass 410), TRC 410(Trace Elliot 410), AMP SV410(Ampeg SV410 + Tweeter), Bassguy 410(Fender Bassman 410), Eden 410(EDEN 410), AMP SV212(Ampeg SV212). AG IR means acoustic guitar IRs. Pulse offers 8 acoustic guitar IRs: G HBird EG Mag(Gibson Hummingbird for Electric Guitar Magnetic PU), G J15 EG Mag(Gibson J15 for Electric Guitar Magnetic PU), M D45 EG Mag(Martin D45 for Electric Guitar Magnetic PU), G HBird Pie(Gibson Hummingbird for Acoustic Guitar Piezo under saddle PU), G J15 Pie(Gibson J15 for Acoustic Guitar Piezo under saddle PU), M D45 Pie(Martin D45 for Acoustic Guitar Piezo under saddle PU), M HD28 Pie(Martin HD28 for Acoustic Guitar Piezo under saddle PU), T 814 Pie(Taylor 814 for Acoustic Guitar Piezo under saddle PU). Pulse IR-Loader offers True-bypass and Buffer-bypass (Trails), just hold the footswitch to boot-up the pedal (do not connect USB). The footswitch indicator will show you the bypass status. (While you boot-up the pedal, if the FS indicator flashes “Green”=BF, “Red”=TB.)Mini but mighty! It also supports Stereo input & output. (Use 1/4” TRS plug, and choose Stereo mode.) Edit Software You can download Pulse edit software on the product page. For the default slots, you can replace any 3rd party IRs into them. Pulse editor will convert WAV format automatically. You can setup the USB stream routing on Pulse editor. FEATURES: WAV format supports automatically. (through Pulse Editor) 3 default IR types in the mini enclosure. (Total = 24slots) Electric Guitar Cab IR: JZ120, DR112, BS410, A212, TR212, 1960, GB412, V412 Bass Guitar Cab IR: AGL DB810, AMP SV810, MKB 410, TRC 410, AMP SV410, Bassguy 410, Eden 410, AMP SV212 Acoustic Guitar IR: G HBird EG Mag, G J15 EG Mag, M D45 EG Mag, G HBird Pie, G J15 Pie, M D45 Pie, M HD28 Pie, T 814 Pie 1024 samples real time calculation True-bypass or Buffer-bypass Supports Stereo Low power consumption. (less than 100mA) USB Audio Stream, Firmware Update Pulse Editor for 3rd party IR loading, IR tweaking. (IR Level, Low Cut, High Cut) Mini but mighty! It also supports Stereo input & output (Use 1/4" TRS plug, and choose Stereo mode) The USB-C port is for firmware update. Connect USB cable to a PC and hold the footswitch to boot-up the device and to enter the DFU (Device Firmware Update) mode. Once connected you can do firmware updates using DFU updater software SPECIFICATIONS: Input Impedance: 1MΩ Output Impedance: 10kΩ Dynamic Range: 103 dB DSP Processing: 48KHz / 32-bit A/D D/A Sampling Rate: 48KHz / 24-bit Power: 9V DC (Negative tip, Optional ACD-006A adapter) Current Draw: Less than 100mA Dimensions: 94 x 51 x 53mm (L x W x H) Weight: 175g
NUX Sculpture Compressor pedal offers a consistent volume output level and sharpens the signals on top and bottom edges. When you start picking your guitar, it will clean the loud (peak) notes and increase the sustain by raising the level of decaying (quiet) notes. Sculpture also contributes to the signal foundation that’s fed into the rest of your effects chain. It has 2 clip modes, simply you can switch between “Clean Mode” and “Clip Mode” by holding the switch for 1 second.Clean ModeThe clean mode has a wide limit range from bottom to top so if your guitar slams the limits too hard (like humbucker pickups) it is very suitable to control the compression. You can also dial up a very soft and clean compressor for single coil system guitars in Clean mode. Clip Mode (Clip Light is On)If you want to squeeze your sound, Clip Mode will make it tight like a cowgirl's jeans and the compressor will wrap all over the signal. It is very suitable for the single coil guitars to compensate the weak output. Blend KnobWhen you adjust the knobs to catch a perfect balance between clipped frequencies and a good sustain, blend circuit allows you to adjust dry/wet compressor effect level on the processed signal. Whatever you dial-up on Sculpture Compressor, you can simply adjust the opacity of the effected sound.True Bypass / Buffer BypassSculpture Compressor has an embedded selectable buffer bypass.You can change the bypass mode by turning on the power while holding the footswitch.
The Edge delay (NDD-3) is a mini delay pedal with 3 different delay types including ΦPhi Digital Delay, Analog Delay, and Tape Echo. You can switch delay types by pressing and holding the footswitch. The Dotted Eighth is the edge of this delay’s beauty THE EDGE DELAY PROVIDES YOU WITH 3 UNIQUE DELAYS, EACH INCLUDING ACURATE CONTROL OVER ITS SONIC CHARACTER AND FEEL. CLEAR, STUDIO-QUALITY DIGITAL DELAYS. SATURATED AND FLUCTUATING SOUNDS OF TAPE DELAY MACHINES. WARM AND FUZZY ANALOG STYLE REPEATS. Delay Types ΦPhi Digital Delay is a digital delay with a golden ratio 2nd repeat head. It makes your guitar sounds more musical in nature. Easily tweak the knobs, setup the desired sub-division, engage the smart tap tempo, and you’re ready to go. Analog Delay is based on the vintage BBD (Bucket Brigade Device) delay. It produces a very warm sound with natural treble decay. Very suitable for scorching ballad solos with romantic atmosphere. Our unique algorithm replicates the physical infinity oscillation feedback while you tweak the time knob from max to min quickly. Tape Echo is based on the legendary Space Echo machine. We digitally recreated the retro-feel of a real tape and capstan configuration. The Tape Echo emulates the high-frequency saturation and low-end decay of magnetic tape. It’s gently modulated for added richness and color. Tweak the time knob from max to min quickly, and you can get the infinity feedback. Sub-Division with Smart Tap Tempo DELAY SUB-DIVISIONS WITH SMART TAP TEMPOSet the Time knob parameter to your desired sub-division, then you can engage the smart tap tempo by pressing the footswitch twice to get a dynamic sub-division tap tempo delay . Press the footswitch once to engage/disengage the effect. Press twice, to access Smart Tap Tempo. In the meantime, the delay time is related to tap tempo and current sub-division parameter. (The FS indicator will flash as current BPM.) Mini but mighty! It also supports Stereo input & output. (Use 1/4” TRS cable and choose Stereo mode.) *All the brand and model names mentioned on this page are Trademarks of their respective owners, which are in no way associated or affiliated with NUX Effects and Cherub Technology CO. LTD FEATURES: 3 delay types in a mini enclosure ΦPhi Digital Delay: Musical digital delay with golden ratio 2nd repeat head Analog Delay: BBD Warm sound with natural treble decay Tape Echo: High-frequency saturation and low-end decay Sub-division with Smart Tap Tempo. (Maximum: 1500ms) True-bypass or Buffer-bypass (Trails) Supports Stereo I/O with TRS Cable Low power consumption. (less than 100mA) Analog dry signal for low noise and zero latency Mini but mighty! It also supports Stereo input & output (Use 1/4" TRS plug, and choose Stereo mode) The USB-C port is for firmware update. Connect USB cable to a PC and hold the footswitch to boot-up the device and to enter the DFU (Device Firmware Update) mode. Once connected you can do firmware updates using DFU updater software SPECIFICATIONS: Input Impedance: 1MΩ Output Impedance: 10kΩ Dynamic Range: 103 dB DSP Processing: 48KHz / 32-bit A/D D/A Sampling Rate: 48KHz / 24-bit Power: 9V DC (Negative tip, Optional ACD-006A adapter) Current Draw: Less than 100mA Dimensions: 94 x 51 x 53mm (L x W x H) Weight: 175
Mini but Large It's PINK!! NUX Flow Tune has a compact design with a large high-definition LCD display. Every one can easily read the notes while standing on the stage. Perfect for live guitarists. Easy to fit, easy to tune. Flow in Tune There are 3 display modes including a Strobo mode and 2 Arrow modes. The featured display is vivid and looks like a flowing river! Simply flow in tune with your guitar. Bright display in both of sunlight and darkness With a bright and high-definition LCD display, NUX Flow Tune is very cool and easy to be worked with on any stage in both of sunlight and dark environment. No matter where you are performing, you can check tuning informantion on the LCD very well in a distance and keep your instrument in tune all the time. The LCD display of the FLOW TUNE is very clear in bright sunlight.Enjoy playing with it in an outdoor concert. Enjoy playing with it on stage in dark environment. Features TRUE BYPASS/BUFFER/BUFFER MONITOR modes On the FLOW TUNE, you can switch between TB(True bypass), BF(BUFFER), and BFM(BUFFER MONITOR), according to your tastes and environment. Why is BUFFER mode important? The FLOW TUNE not only features a true bypass for outputting the sound exactly as it was input, but now includes built-in BUFFER/BUFFER MONITOR modes.The majority of electric guitars use passive pickups with a high impedance output. When you are using a cable there is a loss of tone, usually high frequencies, after about 6 m (around 18 feet) and this problem gets worse the longer your cable. A buffer boosts the signal over long cables to avoid loss of tone, keeping it clean and clear - even when your pedal is off.The BUFFER enhances the sound quality in bypass mode, so that you can still maintain audio quality even when using a long cable to connect to the tuner, or when inserting the tuner into a complex effects board. More than that, on the BUFFER MONITOR mode, you can even check all notes you played at any time without stopping playing and bending. Fits Any Board Compact size and steady weight, easy to fit the pedalboard with velcro.Besides that, the specially-designed footswitch offers comfortable pressing feedback.The most imporant thing: It's Pink! SPECIFICATIONS: Tuning range: A0 (27.5Hz) - C8 (4186Hz) Tuning modes: Chromatic, Guitar, Bass Display modes: Strobo Mode, Arrow Mode 1, Arrow Mode 2 Bypass modes: True Bypass, Buffered Bypass, Buffered Bypass Monitor A4 calibration: 430Hz – 450Hz Tuning accuracy: ±0.1 Cent Input impedance: 10MΩ Output impedance: 1KΩ Current draw: <100mA Weight: 197.4g Dimensions: 97.4mm x 43.5mm x 41.6mm
The mini SCF (SUPER CHORUS Flanger & Pitch Modulation) tributes to TC Electronic’s Stereo Chorus Flanger, one of the best modulation pedals ever made since 1976. Chorus, Flanger, Pitch Modulation. These deliver the magic swirls, wobbling wonders and pure shimmering awesomeness of the SCF that we know and love, staying true – and paying tribute – to the original. NUX's modern-tech DSP yields a perfect combination of both worlds: analog and digital. To achieve all of the objectives, our engineers had to develop an algorithm that mimics the principles of BBD chips - the key component of Analog Chorus effects. Quality-grade BBD chips in large mass have become incredibly rare, so this method is not practical for making an affordable analog chorus device.. Modulation Types Using DSP technology, NUX is able to offer a mini-pedal with a contrasting array of chorus tones. Besides that, mini SCF offers wider dynamic range, 9V DC power, smart tap tempo that innovates the origin and gives you more good vibes.Chorus: A chorus is basically a pitch generator which mixes multiple delay signals. When the multiple delay signals are mixed with the original signal, a soft and wide sounding modulation effect is created.P.M.: A combination of chorus and pitch vibrato which creates a “light” chorus sound.FLG: A flanger is based on the same principle as a chorus, although here the signal can be regenerated (like adding feedback on a delay) creating a more distinctive sounding effect.Mini SCF offers True-bypass and Buffer-bypass (Trails), just hold the footswitch to boot-up the pedal (do not connect USB). The footswitch indicator will show you the bypass status. (While you boot-up the pedal, if the FS indicator flashes “Green”=BF, “Red”=TB.)Mini but mighty! It also supports Stereo input & output. (Use 1/4” TRS cable, and choose Stereo mode.)*All of the brand and model names mentioned on this page are Trademarks of their respective owners, which are in no way associated or affiliated with NUX Effects and Cherub Technology CO. LTD. FEATURES: Tribute to the legendary modulation pedal~SCF Chorus, P.M., FLG Mini enclosure Wide dynamic range: 103dB Smart Tap Tempo True-bypass or Buffer-bypass Supports Stereo 9V/100mA Analog dry signal for low noise and zero latency Mini but mighty! It also supports Stereo input & output (Use 1/4" TRS plug, and choose Stereo mode) The USB-C port is for firmware update. Connect USB cable to a PC and hold the footswitch to boot-up the device and to enter the DFU (Device Firmware Update) mode. Once connected you can do firmware updates using DFU updater software SPECIFICATIONS: Input Impedance: 1MΩ Output Impedance: 10kΩ Dynamic Range: 103 dB DSP Processing: 48KHz / 32-bit A/D D/A Sampling Rate: 48KHz / 24-bit Power: 9V DC (Negative tip, Optional ACD-008 adapter) Current Draw: Less than 100mA Dimensions: 94 x 51 x 53mm (L x W x H) Weight: 175g
Copyright © 2024 BC Wholesalers
